Parts Needed to Make Your Own Home Solar Panel
Many people think that it is impossible to make their own solar panel at home. The truth is that it’s not so hard to do. You can even produce them for less than $ 200!
Here is a list of items you need to make your own home solar panel and produce enough electricity to keep your own house load.
1. Energy Source- Solar cells (12 V is fine)
2. Charge Controller
This type of system is used to perform administrative burden directly out of the inverter.
Here is a description of the parts needed:
Also known as solar panels they are defining component of a solar electric system. Photovoltaic panels capture sunlight and direct current (DC) to generate electricity.
PV modules are rated in watts on the basis of the maximum power than can produce in the performance under ideal sun and temperature. You must use the nominal power of your PV panels to determine how many panels you need to meet your electrical needs. You can then combine the PV panels in a series, which is called an array.
A charge controller will dramatically increase the life of the battery. This unit will protect the herd against overcharging. When the battery is fully charged, the controller will stop the charging process. Some charge controllers also stop the battery to exercise at night.
Deep Cycle Battery
This is the type of battery you should use in your system. This is what all the energy produced by striking the PV panels. A great source of free deep cycle batteries is old golf carts carts.
The inverter is what converts the direct current (DC) into alternating current (AC). AC is what to use most of your home appliances.
Using these four simple items you can supply enough electricity to your appliances running off and rid yourself of that pesky electric bill.
Source: http://ezinearticles.com/?Parts-Needed-to-Make-Your-Own-Home-Solar-Panel&id=1626483 by Freddie Baumann