Solar Freedom Can Be Achieved Now; Solar Freedom Can Happen for You
SolarFreedomNow.com – Are your electric bills out of control? Does your house receive plenty of direct sunlight? Consider Solar Panels as energy alternative to save you money. In the next few lines we’ll speak about the benefits and how to setup one.
How much does it cost?
Solar panel use watts as their measuring system. For example, solar panels between 1- 10 kilowatt are for urban area homes. The median size of a urban solar panel is 5.2 kilowatts. The median cost for installing it was $6.10 per watt nationwide in 2011 according to the U.S. Department of Energy’s Lawrence Berkeley National Laboratory. However, once the federal, state incentives kick in, the cost can drop ranges between $0.90 per watt to $1.20 per watt for systems.
- Decrease your electric expenses:
A solar panel system for urban areas would reduce your electric expenses from 25% to 50% says Monique Hanis, a spokeswoman for the Solar Energy Industries Association. The median household spends nearly $110 monthly. As result, solar panels can lower costs $300-$600 annually. The required time period to cover the cost of initial investment depends on how much sun you get in the area you live, the magnitude of solar panel, the solar panel expenditure, and future electricity expenses. Consequently, it would take 6-18 years to recoup the initial investment cost says Hanis. Generally, a solar panel last between 20-30 years.
The customer can accelerate the rate of recouping the investment through producing a lot of solar energy. Furthermore, a battery can save the excess energy for usage at a later time or sell the extra energy to the electric company.
- IRS provides federal tax benefits
If you had setup a solar panel starting Jan. 1, 2009, and Dec. 31, 2016, you can get tax benefit, covering 30% of your expenses. In order to get the credit, you need to have solar panel in an urban area and comply with building regulations. For example, if a 5.2 kilowatt solar panel costs $22,100, you would get back $6,630 from the IRS. The tax credit can be implemented for solar panels established at your first or secondary urban area home. You get the tax benefit using IRS form 5695 the year the solar panel becomes functional. Furthermore, the tax benefit can’t be more than the federal tax you need to pay for that year. However, it can be expensed over several years. Therefore, it behooves the user to save the receipt. You can get more on the tax issue at http://www.houselogic.com/home-advice/tax-credits/tax-credits-installing-solar-panels/
You can buy solar panels from a provider and have their installers set it up for you, or you can do it yourself. If you buy from a solar power provider, they often have no-money-down deals, or even deals where you only pay for the energy bill and not the panels.
The following is an idea of what it would take to do it yourself.
Setting up a Solar Panel
- Required Supplies:
If you plan on a basic design, you need a saw and screwdriver. Furthermore, you’ll need silicone caulk and wood glue. Lastly you need device to cut wires, all of which you can find in shops that sell tools to conduct such an activity.
- Getting Solar Cells:
A Solar Panel consists of cells wired together in a container. Since the average panel generates 18 volts, you need 36 cells for each panel. Each 18 bolt will provide 3-4 amp of power when exposed to direct sunlight. Don’t buy cells of bad quality as they have broken corners, thus they don’t produce enough energy. Buy cells that are tabbed, thus wiring will become easier.
- Building box
You need to build a box in which to hold the cells. Plyood is the best material. Afterwards, you would need to paint it. Also, make a hole for the wires, so they would come out of the box. Lastly, get a Plexiglass sheet as a clear cover for the box.
Wiring the cells
After gluing the cells, you need to fasten the cells together through a wire. The 36 cells will result in the 18 volts. Buying pre- tabbed wires will make it easier to fasten the tab. Furthermore, it’s recommended that you use a diode, enabling it to guide the sunlight in one direction. If the panel is connected to a battery, at night the energy stored in the battery can flow back to the panel, thus wasting the energy. Using diode would prevent this from happening. Generally, a charge controller would disallow energy from dissipating from the battery. Furthermore, if you don’t plan to connect the charger to a battery, you don’t need a diode.
Connecting the cells
Use silicone caulking at the center of the back for each cell, thus the wood will open and close with the heat. However, if you apply it at sides, the connection would get broken. Place the cells on inside the frame and attach each one, allowing the caulking to dry.
There are a couple of more things to do before having a DIY solar panel. Make a hole at the very bottom of the box so the wires come out. Afterwards, use caulking to cover the hole after getting the wires through so humidity stays out. Next, stick the substrate with the connected solar cells into the box. Finally, tighten the plexiglass which is on top of the box. Last but not least you fasten a connector to tip of wires. The kind of connector depends on what you intend to attach the panel to.
Get the voltmeter and expose the panel to sunlight. Next, connect the voltmeter to the panel which should measure 18-20 volts. If you get it in that range, it means you have yourself a functional and useful DIY solar panel.
Take a look this video for more information about this:
In conclusion, a solar panel can do wonders for your freedom from the big power companies and you can get them often for no money down or build your own.